普洱附近有没有服务

Aluminum surface treatment
surface treatment
Product recommendation
Contact APAs / contact us
Address: a3-2 Saida international industrial city, Xiqing Economic and Technological Development Zone, Tianjin
Email: lxc@apas.com.cn
Tel: 022-87920088
Fax: please contact the network administrator
Postcode: 300385
Hotline: 137021119190 (24-hour service hotline)
Surface treatment
  • Degreasing process of industrial aluminum profile
    The surface treatment effect is good or bad, in addition to the process itself, the pretreatment process is crucial; in the actual production of electroplating, the poor adhesion between coating and industrial aluminum profile is the most common fault, 80% of which is caused by poor pretreatment before plating. Therefore, in order to obtain high-quality coating, it is necessary to
    Consult immediately Click to view
  • Surface mechanical polishing of industrial aluminum profile
    Mechanical polishing is generally carried out on the basis of polishing, to further remove the micro unevenness on the surface of industrial aluminum profiles, so that it has mirror like luster; it can be used for the preparation of industrial aluminum profiles before plating, also can be used for finishing after plating, so that the coating surface can obtain decorative appearance, and improve the quality of the coating
    Consult immediately Click to view
  • Surface polishing of industrial aluminum profiles
    Polishing is a kind of mechanical treatment method to remove burr, sand hole, welding scar, scratch, corrosion mark, oxide scale and various macro defects on the surface of industrial aluminum profile, so as to improve the surface smoothness of industrial aluminum profile;
    Consult immediately Click to view
  • Shot peening on aluminum profile surface
    After shot peening, the dirt on the surface of aluminum profile is removed, the surface of aluminum profile is slightly changed without being damaged, and the surface area is increased;
    Consult immediately Click to view
  • Sandblasting of industrial aluminum profiles
    Sandblasting is the use of high-pressure wind or compressed air as the power to blow out the high-speed impact on the surface of industrial aluminum profiles to achieve the cleaning effect, but the selected medium is different, the effect is not the same; after sandblasting, the surface of industrial aluminum profile is removed, the profile surface is slightly damaged, the surface area is
    Consult immediately Click to view
  • Surface defects of anodized aluminum profiles and Countermeasures
    In the surface treatment process of rolling aluminum profile, some surface treatment defects often appear due to the lax operation process, which will directly affect the performance of aluminum profile. The following briefly introduces the surface treatment defects and Countermeasures of aluminum profile;
    Consult immediately Click to view
Hot product recommendation / hot

Worry about quality?

Quality

Worry about ability?

Ability

Worried about service?

Service

Click to view

Please register as a member to download the product data.

Box:

Verification Code: Click to refresh the verification code

Note: * is a required field, and EPPs promises not to disclose customer's personal information.

* user name: The English name is 4 to 16 letters or numbers, and the Chinese name is 2 to 8 Chinese characters

* Email:

* phone number: Example: 1382xx465x

* Administrative Region: Please select your province and city

Detailed address:

* Fill in the password: Any character from 6 to 16 bits, case sensitive

* Confirm password: Please enter your password again

* Verification Code: Click to refresh the verification code Click the verification code to refresh